You are here

Made In The U.S.A.

 BMP’s products are proudly made in the USA and employs American workers!

COMPANY INFORMATION

Best Management Products, Inc.

HEADQUARTERS
53 Mt. Archer Road
Lyme, CT
06371
USA

860-434-0277
860-434-3195 fax
Amanda Taylor, Office Manager

SALES AND ENGINEERING OFFICE
506 Beck Avenue
Essex, MD 21221
USA

410-687-6256
410-687-6757 fax
T. J. Mullen, President
tjm@bmpinc.com

Products: Snout®, Bio-Skirt®, Stainless FlowDeftector™, Stainless TrashScreen™

Domestic Manufacture: All finished products are 100% manufactured and assembled in the USA.

Domestic Shipping: All products are shipped on domestic carriers from warehouses in the USA.

Sub Assemblies: All sub assemblies (e.g. gaskets, hardware, etc.) are from US companies.

Raw Materials: More than 85% of raw materials in finished goods are of domestic origin.

Please direct further questions to contacts listed above.

Explanation of terms, standards, and labels:

There are many terms, standards, and labels used throughout the Best Management Practices stormwater quality realm.  The industry relevant terms related to our products are listed below:

Catch Basin Trap, Catch Basin Oil and Debris Trap, Catch Basin Debris Trap, Environmental Hood, Catch Basin Insert, Catch Basin Inlet Filter, Inlet Filter, Catch Basin Hood, Catch Basin Debris Hood, Catch Basin Oil and Debris Hood, Oil and Floating Debris Trap, Catch Basin Baffle, Storm Drain Filters, Treatment Train Device, Oil and Floating Debris Trap, Stormwater Catch Basin with Filtration, Adsorbing Filter, Adsorb Filter, etc.: These terms relate to or could describe the BMP SNOUT used alone or in conjunction with the Bio-Skirt or Stainless TrashScreen.

Low Impact Development, LID, LID-compliant, LID-requirements: The BMP SNOUTBio-Skirt and Stainless TrashScreen may all be described as Low Impact Development or Low Impact Design (LID) products or devices.

Stormwater Pollutant Removal (STC), Oil and Sand Removal (OSR), Sediment and Hydrocarbons filtration system, Waterworks Products, Trash and Debris Remover, Stormwater Filter: The BMP SNOUT, Bio-Skirt and Stainless TrashScreen can be labeled with any of of these terms.  Our products can remove oil, sand, debris, sediment, hydrocarbons, bacteria and other pollutants (including phosphorus) from stormwater, in an effort to improve the quality of the runoff which drains into surface water bodies.

Total Maximum Daily Load, TMDL, TMDL rules, TMDL requirements, Total Maximum Daily Load requirements, Total Maximum Daily Load rules: The BMP SNOUT, used alone or in conjunction with the BMP Bio-Skirt or Stainless TrashScreen may be used to reduce certain pollutants of concern in compliance with a TMDL.

Best Available Technology, BAT, Best Available Technology Compatible, BAT compatible: The BMP SNOUT, used alone or in conjunction with the BMP Bio-Skirt or BMP Stainless TrashScreen could be a BAT device(s).

EPA-compatible, EPA-approved, NPDES, 40CFR 122.26, LEED, LEED Credits: The BMP SNOUT, used alone or in conjunction with the BMP Bio-Skirt or BMP Stainless TrashScreen may meet certain stormwater treatment standards established by the EPA and other government agencies, and may also qualify for certain LEED credits.

BMP, Best Management Practice, EPA approved BMP, BMP Stormwater Solution: The BMP SNOUT, used alone or in conjunction with the Bio-Skirt or Stainless TrashScreen qualify as a Stormwater Best Management Practice or "BMP"  and are manufactured by Best Management Products, Inc. (BMP, Inc.).

Field testTSS, TP, EPA, Trash: The BMP SNOUT has undergone some field testing to evaluate it's performance including third party tests, Information on Solids removals can be seen here.

 

Protected by US Patents 6126817, 7857966, 7,951,294, 8,512,556 and Canada Patents 2285146, 2,690,156, 2,740,678. Other US and International Patents Pending.